>
produkty >
elektronický výrobek >
Zapojení řídicího systému >
Modul rozhraní >
Interface moduleDM50-IDC-10-10-4G-00A(H)
.jpg)
Interface moduleDM50-IDC-10-10-4G-00A(H)
30040000055
IDC module,japanese terminal block,with screw connector and IDC stitching line,can be installed on DIN35 rail,10 positions
channels
- 10
- 20
- 26
- 34
- 40
- 50
current
- 1A
width of panel
- 50mm
- Přehled
- Technická data
- Příloha
- Osvědčení
- Obchodní data
- Stáhnout informace
Výhoda produktu
10digits to 50digits1:1 connection
Screw connection
- 3D model
- Environmental data
- Standards/Regulations
- Technical data
- Connection data 1
- Connection data 2
- Dimension
3D model
Environmental data
| Ambient temperature (operation) | -20 °C ... 70 °C |
| Ambient temperature (storage / transport) | -20 °C ... 70 °C |
Standards/Regulations
| Standards/Regulations | IEC61810 |
| Pollution level | 3 |
| Overvoltage category | Ⅲ |
| Rated overvoltage | 0.5kV |
| Flame retardant grade, in line with UL94 | V0 |
Technical data
| Installation location | Arbitrary |
| Maximum allowable working voltage | 30VDC |
| Maximum allowable current | 1A |
| Signal points | 10 |
| Status Display | no |
Connection data 1
| Connection name | Control system side |
| Connection method | IDC connection |
| Connection volume | 1 |
| Number of digits | 10 |
| spacing | 2.54mm |
Connection data 2
| Connection name | On-site side |
| Stripping length | 6-7mm |
| Cross section of flexible conductor | 0.3mm²--2.0mm² |
| Connectable guide cross section AWG | 22-14AWG |
| Connection meets standards | UL1059 |
| Connection method | Screw connection |
| Connection volume | 1 |
| Number of digits | 10 |
| screw thread | M3 |
| Hard wire cross section | 0.3mm²--2.0mm² |
Dimension
| length | 66mm |
| width | 57mm |
| Height | 44mm |
Accessories
| Wire harness | DX211-1S-500-00A(H) |
| číslo objednávky | 30040000055 |
| Balicí jednotka | 6 |
| Minimální množství pro objednání | 12 |
| Hmotnost výrobku (bez obalu) | 70 |
| 3D | |
|---|---|
| DM50-IDC-10-10-4G-00AH.stp | Stáhnout informace |
| CAD Data | |
|---|---|
| DM50-IDC-10-10-4G.dxf | Stáhnout informace |
| Data | |
|---|---|
| DM50-IDC-10-10-4G.pdf | Stáhnout informace |
Odpovídající díly
- Všechny podpůrné produkty（1）
- Související produkty（2）
Filtrovat podle parametrů produktu
MIL cable-DX211-1S-500-00A(H)
MIL cable,connector1:IDC/MIL female connector（1×34 Core,90° output）,connector2:IDC/MIL female connector（1×40 Core,90° output）
FCN Interface Module
I/O Interface Module, can access binary or ternary NPN signal, with indicator light, with screw connection, can be installed on DIN35 rail, 8/16 bit
MDR Interface Module
MDR module, input/output module, with screw connection and MDR connector, can be installed on DIN35 rail, 20-50 positions
